Waterflush

The WATERFLUSH was developed to fill the cooling water system of a vehicle without air and to refill, drain or clean the coolant. It consists of the following components:
- 30 liter tank with vent valve
- Mixing valve
- Diaphragm pump – optionally with 12 VDC or 115 VAC or 230 VAC (see table)
The choice
Depending on the vehicle-specific requirements for couplings (female / male) and connections, the following system variants can be ordered:
Waterflush with CPC system
Article-No. | |
Z-B 1000 3023 | 12 V / DC |
Z-B 1000 3022 | 115 V / AC |
Z-B 1000 3021 | 230 V / AC |
Waterflush with Stäubli system
Article-no. | |
Z-B 1000 3019 | 12 V / DC |
Z-B 1000 3018 | 115 V / AC |
Z-B 1000 3017 | 230 V / AC |




Waterflush accessories and spare parts
CPC couplings spare parts kit
Z-B 1000 3009
- 3 QDV couplings (female) for hose 12 mm
- 2 QDV couplings (male) for hose 12 mm
- 4 QDV couplings (male) with external thread 1/2” BSP
- 1 coupling (male) with external thread 3/8“ BSP
Replacement pumps
Article no. | |
H-P 2000 0019 | 12 V / DC |
H-P 2000 0038 | 115 V / AC |
H-P 2000 0036 | 230 V / AC |
Coupling Converter-Kit
Z-B 1000 3020
CPC/Stäubli: Enables the WATERFLUSH to operate with both systems.
Air Blow Tool
Z-B 1000 3026: Stäubli
Z-B 1000 3008: CPC
Blow-off tool for cooling water with compressed air. Supports the suction pump of the WATERFLUSH for complete draining of the cooling water circuit.
Waterpick
- Waterpick container with filter 60 µm
- To add cooling water in the pit lane if the engine is hot
- The receiver is fitted inside or outside the car
- The pressurized container allows injecting water into the hot cooling system without spillage
The basis
The basis of our Waterpick is the container with two different capacities: 9l and 19l. Please be aware, that you have to order the hose and the connection system additionally.
Waterpick container 9 l
Z-B 1000 1209

- Pressurized bottle to refill oil up to 6-7 liters in the pit lane with more than 1 car
- Total capacity of 9.0 liters
Waterpick container 19 l
Z-B 1000 1119

- Pressurized bottle to refill oil up to 13 liters in the pit lane with more than 1 car
- Total capacity 19.0 liters
The connection systems
Depending on which filling system you prefer, we can equip the container with the appropriate connection system. There are three different Waterpick tools available (A, B or C).
A) Waterpick tool CPC
Z-B 1014 0021
Consisting of a 1.5m Waterpick hose and a CPC coupling dispenser
B) Waterpick tool Stäubli
Z-B 1014 0004
Consisting of a 1.5m Waterpick hose and a Stäubli coupling dispenser


C) Waterpick tool with filling gun
Z-V 9000 0008 Gun
B-S 1060 0015 Waterpick hose


Additionally available:
Z-V 9000 0007 Receiver at car side
Z-V 9000 0088 Dustcap for receiver

